Vulkanus VG2 Notch Sharpener

The Vulkanus VG2 sharpener features two vertical sharpening rods placed crosswise with hardmetal carbide surfaces. The sharpening rods are supported by springs and move inside their notches based on the pressure produced by the blade. The sharpening angle remains correct at all times inside the notch. The VG2 sharpener is suitable for both straight and serrated blades with a blade angle of 11–21 degrees.

The VG2 sharpener can be used to both sharpen a new edge or to hone the blade. Pull the knife upward if you want to create a new edge. Pull the knife downward when you want to remove the burr after sharpening or just maintain the knife. Sharpen serrated knives by pulling the knife horizontally through the notch, turning the handle toward the flat edge (only one side of a serrated blade has a cutting-edge angle, while the other is flat). See the video for a demonstration of the sharpening procedure.

The body of the sharpener is made from polyethylene. The sharpener meets the CE requirements for food processing. The sharpener is dishwasher safe.

• Height: 150 mm, width: 110 mm, depth: 90 mm
• Weight (net): 0.29 kg